Anti Sleep Alarm

Thank for your purchasing of anti sleep alarm StopSleep! We created it for your safety by conducting serious scientific research. We hope that it will serve you faithfully.

1. Anti sleep alarm StopSleep delivery set

The set includes (check at the opening of the factory packing):

  • Anti sleep alarm StopSleep - 1 pc.
  • Case for anti sleep alarm StopSleep storage - 1 pc.
  • This User Guide - 1 pc.

Option: the package may include a Micro-USB / USB adapter.

2. Description

Anti sleep alarm StopSleep was designed to prevent falling asleep of the user. We recommend to use it in the following cases:

  • When driving, especially in long trips and traffic jams;
  • When operating equipment of a continuous production cycle, which work requires constant attention of the operator;
  • While guarding or patrolling, especially at night;
  • In situations where falling asleep can lead to unwanted or accidental impact.

Anti sleep alarm StopSleep is a ring worn on any two fingers of left or right hand. For easy holding on your hand there is a double ring 2 in the upper part of which is mounted case 1 with the switch 3. The loudspeaker 4 for generating audio signals is installed inside the case.
The internal battery of anti sleep alarm StopSleep is charged through the port 5, which is compatible with a standard micro-USB. Charging is carried out by standard chargers from AC outlet or car battery, as well as from the computer (depending on the charger).
Operation principle of the anti sleep alarm StopSleep is based on measurement of skin conductance (electro-dermal activity - EDA). EDA is a reflection of brain activity.
The anti sleep alarm StopSleep does not prevent falling asleep physically. It only warns the user of the dangerous condition. The user of the anti sleep alarm StopSleep always brings responsibility for the user’s state!
Features:

  • The anti sleep alarm StopSleep does not require customization.
  • Continuous operating time without recharging the unit for at least 10 hours (typically - up to 20 hours depending on usage).
  • Ways of generating signals: sound, light and vibration.

3. Setting-up

The anti sleep alarm StopSleep requires minimal setting-up:

  • Charge the battery. The battery must be charged to a level sufficient to power the anti sleep alarm StopSleep for at least two hours (if not, the anti sleep alarm StopSleep will warn about this - see “Working with the anti sleep alarm StopSleep”);
  • Put the instrument on; hands should be warm and clean.
  • Press the “Power” button on the anti sleep alarm StopSleep.

The anti sleep alarm StopSleep is ready three minutes after switching on.
WARNING! The anti sleep alarm StopSleep must be switched on in advance, without waiting for a dangerous condition.

4. Warranty and safety

We recommend you to check work of the anti sleep alarm StopSleep at home. To do this, put it on your hand, turn it on not less than one hour before bedtime. Try to sleep with the devise turned on. You definitely will get a signal “Attention” and / or “Alarm”.
Manufacturer’s warranty period is 2 years from date of sale of the anti sleep alarm StopSleep.
Requirements in case of return: lack of damage of the anti sleep alarm StopSleep and packaging, as well as its completeness.
WARNING! Warranty does not cover mechanical damage, as well as breakdown due to moisture.

5. Working with the anti sleep alarm StopSleep

Typically, the anti sleep alarm StopSleep should not bother you if there is no reason for. False alarms can occur due to a sudden change in environment, in temperature (going outside, opening windows, etc.). In other cases, in our experience, if an alarm is ringing - this does not always means falling asleep, but always it is a weakened reaction on surroundings. For the driver this is a dangerous condition that requires urgent action. Table 1 shows the types of signals.

Table 1. Signals generated by the anti sleep alarm StopSleep

N Signal Description Note
1 Switching on

Beep, jerk (short vibration), green LED, which switches off after 3 seconds
green LED with 5 seconds intervals

To switch on the anti sleep alarm StopSleep, push the “Power” button for 2 seconds on the switched off anti sleep alarm StopSleep.
The anti sleep alarm StopSleeps generate a beep to indicate about level of battery charge. Than more beeping, then less charge. Maximum is 6 beeps (low battery)

2

Switching off

The LED corresponding to the level of battery charge during pressing of the button, then beep.

To switch off the anti sleep alarm StopSleep, push the “Power” button for 2 seconds on the switched on anti sleep alarm StopSleep. The anti sleep alarm StopSleep generates signal and switches off automatically when there is insufficient battery charge

3

Low charge

Beep, flashing of the red LED.
With a further reduction of the charge signal is repeated with beeping and flashing

If possible - to take off the anti sleep alarm StopSleep, plug in the charger. After triple-beeping do this – there may not be enough energy for alarm

4

Attention!

Double-beep, flashing of the red LED

The anti sleep alarm StopSleep detects the weakening of your reaction. We recommend you to take measures to increase your activity level. See item 6 of the User Guide

5

Alarm!

Vibration, suond ”Bells”, flashing red LED

You need to have a rest or to take urgent measures to increase the activity. See item 6 of the User Guide

6

No contact

Triple beeping every two minutes, red LED flashes every two seconds

Perhaps the anti sleep alarm StopSleep was switched on before taking on. If it takes on, the reason may be cold, dry hands. The quality of the contact will improve if your warm hands

7

The anti sleep alarm StopSleep is switched on

LED flashes with 5-minute intervals.

Provides information about the anti sleep alarm StopSleep and the battery level.

8

Battery charge

Red LED flashes with 5-second intervals.

Continues to be recharged

9

Battery is fully charged

Green LED flashes with 5-second intervals.

Disconnect the battery charger.






























 

6. Recommendations to avoid falling asleep

If you feel that you strongly sleepy, we do recommend you not to try to deal with sleep, and stop and have asleep for 15 minutes. Even such a short rest will dramatically reduce the likelihood of falling asleep on the road. Remember, you are risking not only your property but also your life.
Other means to avoid falling asleep are well known to everybody and widely used, but much less effective:

  • Active movement (walk, jump, work with your hands);
  • Deep breathing or yawning;
  • Exercises for the back (to straighten the back).

We do not recommend using coffee to prevent falling asleep: after a brief relief of sleep state the probability of falling asleep increases dramatically.
We should warn about the following:

  • A large number of accidents caused by falling asleep happen within first 10 minute drive from the house;
  • Only one in four drivers stopped, feeling the danger of falling asleep.

We wish you safe and trouble-free trips! Good luck!

100% Satisfaction Guaranteed! Try it yourself for 90 days!

We grant you the right to return the StopSleep during the first 90 days after its purchase without providing reasons.